GURE20320 Husqvarna Viking

Husqvarna Viking Piping Foot (Cat 6) Sewing Feet

  • Husqvarna Viking Piping Foot (Cat 6). Insert packaged Piping into seams and edges for a tailored finish. Cover cord with fabric for specialty piping. Straight stitch, length 2.5. Additional information1. Snap on the Piping Foot. To stitch piping into a seam.2. Place piping along seam line on right side of fabric. Place second piece of fabric on top with right sides together.3. Put fabric and piping layers under Piping Foot with the piping in the groove on the underside of the foot. Sew. The groove on the underside of the foot will guide the piping as you sew.(Hint: Notch the seam allowance of the piping on curves and corners.)To make piping from your fabric:1. Cut Bias or crosswise grain strips, wide enough to cover the cording plus seam allowances.2. Lay the cording on the wrong side of the fabric strip and wrap the fabric over the cord.3. Place the fabric and cord under the Piping Foot with the cord in the groove on the underside of the foot.4. Sew. The groove will guide the cord so the fabric covers it evenly.(Hint: When you sew this piping into a garment, adjust the needle position so it stitches one setting closer to the cord to cover the first stitching.)


Domestic Use Only. Not suitable for Children Under 36 Months.


Husqvarna Viking 10 Year Warranty HV03

Manufactured by

Husqvarna Viking










Usually Despatches Within 3 Working Days
Add to Wishlist