- Measure the relative humidity, dewpoint and temperature
- Hygrostick & extension lead, moisture probe, deep wall probes, surface temp sensor, carry case.
- Identify the presence of moisture on and below surfaces and beneath coverings like ceramic tiles
- Confirm the presence or otherwise of condensation on surfaces
Using the Protimeter MMS moisture meter and hygrometer modes in combination gives the user a complete diagnostic capability. Search and measure moisture meter modes distinguish sub-surface moisture from surface moisture in materials, the hygrometer gives accurate (RH) measurements and the condensator mode confirms the presence or otherwise of condensation on surfaces.
Moisture Meter - Search Mode Use the MMS in search mode to identify the presence of water behind decorative finishes such as tiles and wallpaper without damaging the surface. A relative scale indicates if the material is in a dry, borderline or damp condition.
Moisture Meter - Measure Mode Use the MMs in measure mode to determine the percent moisture content of wood and the wood moisture equivalent (WME) value of other non-conductive building materials. Deep wall probes are used to measure the WME levels at depth in walls for monitoring or diagnostic applications.
Moisture Meter - Data Logging Mode - (AVAILABLE ON THE PLUS MODEL ONLY - Please call for price) The MMS has the ability to log and store up to 1000 results with time and date stamp. Comes complete with software to download into windows based PC and Chart and graph.
Hygrometer Mode In hygrometer mode the MMS measures the relative humidity (RH) and ambient temperature of environments. The Hygrostick can be embedded in walls or floors to measure the materials' equilibrium RH value.
Condensator Mode The condensator mode is used to confirm the presence - or otherwise - of condensation on surfaces. The instrument displays the difference between the dewpoint temperature and the temperature of the surface against which the temperature sensor is held.
Humidity Sleeves Can be used in conjunction with MMS to measure the internal equilibrium relative humidity of solid floors
Protimeter MMS Moisture Measurement Systems
Hygrostick (POL4750) Range 30-100%, ideal for concrete applications
5" (127 mm) insulated deep wall probes (BLD5018)
Moisture probe (BLD5060)
Calibration check device (BLD5086)
Hygrostick/Humistick ext. lead, 30" (76 cm) (BLD5802)
Instructions and nylon zipper pouch
Wood species calibration table
One year parts and labour warranty
Moisture Measurement Range
Pin (% WME) 8% to 99, readings over 30% are relative Non-invasive (RF) up to 3/4 in (19 mm) deep 60 to 1000 (relative)
Surface Temperature Probe Range
15°F to 120°F (-10°C to 50°C)
Hygrostick Data (Nominal)
30% to 40% RH (±3% RH) at 68°F (20°C) 41% to 98% RH (±2%) at 68°F (20°C) Range 32°F to 122°F (0°C to 50°C) ±0.6°F (±0.3°C)
Quickstick Data (Nominal)
0% to 10% RH, ±3% RH at 68°F (20°C) 10% to 90% RH, ±2% RH at 68°F (20°C) 90% to 100% RH, ±3% RH at 68°F (20°C) Range 32°F to 122°F (0°C to 50°C) ±0.6°F (±0.3°C) Nominal response 30% to 90% and back to 30% RH in 45 seconds @ 68°F (20°C) Quicksticks for meters made with firmware version 3.15 or higher.
Store up to 1,000 results with date and time stamp from all instrument functions
10.58 oz (300 g) instrument only. 2.5 lb (1.1 kg) complete kit
7 in x 2.75 in x 1.9 in (180 mm x 70 mm x 49 mm)
Maximum Needle Depth
0.4 in (10 mm)