Sorry - this product is no longer available

This is no longer available although you may find similar or newer versions below:

View Large & Mouseover to Zoom
thmbnil
thmbnil
AHCC39664 Q.Max

Q.Max Sheet Metal Punch 30mm

by Q.Max
£11.79
11.79
facebook

Description

Product Description

    • Position the die on top of the die nut and then screw the die nut onto the projecting hexagonal screw until it touches the metal sheet
    • The screw will pull the punch through the metal and a hole will result.

      Please note these instructions apply to cutters up to 15 mm in size, for cutters 15 mm and over have a different configuration

    • Notably they have fewer components, in the larger cutters the thread is in the punch and thus there is no die nut.


      Size.30.0mm.
      Key Type.MB

    • 8mm hexagonal wrench

    • A quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge.

      The special design allows even load during cutting and produces a burr free hole that needs no extra finishing.

      Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting.

      All punches are sold singly without key, which should be ordered separately.

      Thread the punch onto the hexagonal screw and then pass the hexagonal screw through the hole

    • Use a hexagonal key to turn the hexagonal screw
  • HCODE

    AHCC39664

Dialog example

This is dummy copy. It is not meant to be read. It has been placed here solely to demonstrate the look and feel of finished, typeset text. Only for show. He who searches for meaning here will be sorely disappointed.

Dialog example

This is dummy copy. It is not meant to be read. It has been placed here solely to demonstrate the look and feel of finished, typeset text. Only for show. He who searches for meaning here will be sorely disappointed.