ISLS18361 Rytons

Rytons 9X3 Floor Vent Set - Brass

  • Rytons FV10BRASS - Rytons Floor Ventilator with Brass Louvre
    Product Summary:

    Room ventilator utilising air from a ventilated sub-floor void

  • Mirror polished solid brass louvre grille provides a stylish appearance

  • Inverted louvres give a flush finish

  • Brass coloured screws included

  • BBA approved - your independent assurance that the product meets building regulations and standards and will last

  • Free Area

    11000mm² (110cm²) per set

  • Size
    267mm L x 95mm H x 125mm D

  • See our image gallery above for a dimensional drawing
  • AutoCAD drawing available by email

  • Colours

    Louvre Grille: Polished brass


Product Description

  • Sleeve: Black

  • Composition

    Louvre Grille: 1mm thick half hard solid brass

  • Sleeve: Polypropylene
  • Contains recycled plastic

  • Melting Point: Louvre Grille: Approximately 900°C

  • Installation

    Cut an opening in the floor and insert sleeve (sleeve can be trimmed with a fine tooth saw to reduce the depth if required)

  • Fasten louvre through pre-formed holes in the flange around the sleeve using screws provided

  • Peel off the protective film

  • Note : When installing in an uncarpeted floor the flange may be trimmed back slightly and the louvre ventilator screwed into the floor to maintain as flush a finish as possible

  • Important : In areas where radon gas has been identified as a problem, ventilation shall not be taken from the space below ground floor level (e.g
  • using a floor vent), or interfere in any way with any remedial measures already in place to prevent radon gas entering the habitable part of the dwelling

  • UK Regulations and Standards

    The Building Regulations, Approved Document J

  • The Building (Scotland) Regulations, Mandatory Standard 3.21

  • The Building Regulations (Northern Ireland),
    Technical Booklet L
  • British Standard BS 5440-2:2009

  • For venting decorative fuel effect gas fires refer to British Standard BS 5871-3:2005

  • Handling Information

    Box quantity: 1 set

  • Box size: 28cm W x 11cm H x 14.5cm D

  • Box weight: 0.39kg

Manufactured by










Usually Despatches Within 2 Working Days
Add to Wishlist