View Large & Mouseover to Zoom
HOUM10212 Gap Lighting

T-100W Driver for up to 20 metres of LED lighting strip - 20m

by Gap Lighting
£64.80
64.80
  • Input 240v, Output 12vThis is a brilliant super-bright LED tape for background lighting in white or chose from 5 different colours. Producing 350 lumens per metre*, this 5m LED tape has 60 LEDs per meter. The LEDs will last up to 50,000 hours; that's over 17 years at 8 hours every day. This extendable LED tape is an extremely price attractive LED lighting system combined with low power consumption. Be sure to choose thecorrect power supply from below. The LED tape has an adhesive back and is quick and easy to install. There are 60 SMT LEDs per meter, with a spacing of 16mm. The beam angle of the LEDs is 140° to 160°.Linear LED lighting with flexible PCB and 3M adhesive backing. High intensive light output with low energy usage. This LED lighting tape is lightweight at only 0.23kg and flexible. Therefore this LED tape can be used in both rigid and flexible coving. For damp environments such as bathrooms, LED lighting tape with a IP65 rating is available at an additional £12 per 5m. To extend the 5m lengths of LED lighting tape is a simple process. Simply lay the additional LED lighting tape and wire back to the driver using bell wire. Just request the bell wire and we will supply free of charge with your order. The 5m LED lighting tape lengths can be cut at 5cm intervals to end, or to be extended with the bell wire and then re-joined. Our LED lighting tape and drivers are high quality products at competitive prices with the dimmable option. RGB and single colours are available from stock, just phone our office. If you have any questions about any of our lighting products please phone us. Halogen capsule 10w = 100 lumen, 20w = 260 lumen. Choose the correct power source for your installation of LED tape from our simple range guide.Wire each 5m length back to the driver (transformer) to avoid a voltage drop towards the end. Speaker wire is recommended or a minimum 2amp cable. To avoid excess cabling a small connector block can be used at the end of each 5m length, but increase the amp rating of the cable. However normally two lengths of 5m tape can be soldered together to make 10m without visible drop off if desired.Our LED lighting tape can be used in our uplighter coving range or as a stand-alone purchase. LED lighting can be used for above kitchen cupboards, under kitchen cupboards, tucked in recesses for mirror surrounds, window frames, door frames, shelving or behind trims. Anywhere in any room of the house where there is a recess and discrete lighting is wanted. LED lighting is easy and energy efficient. Use in with our LED Mini & LED Midi kits. Sets of 10 LED lights which can be mounted into our coving to give additional or alternative LED lighting. We offer a bespoke service for any project at no additional cost. Simply give us the measurements and we will do the rest. Safety Notice: Whilst our skirting can be installed by DIY enthusiasts and competent tradesmen electrical wiring should only be carried out by approved electrical contractors! Failure to observe this requirement both breaks UK law, and could result in serious injury or even death. Please call in an approved electrical contractor.
Quantity:
  • In Stock - more than 10 - buy now!
Dispatched & sold by: House Martin GRP Ltd
facebook

Description

  • HCODE

    HOUM10212

  • MPN

    T-100W

  • MANUFACTURER

    GAP Lighting

  • CONDITION

    NEW

Dialog example

This is dummy copy. It is not meant to be read. It has been placed here solely to demonstrate the look and feel of finished, typeset text. Only for show. He who searches for meaning here will be sorely disappointed.

Dialog example

This is dummy copy. It is not meant to be read. It has been placed here solely to demonstrate the look and feel of finished, typeset text. Only for show. He who searches for meaning here will be sorely disappointed.