ISLS18392 Vent-Axia

Vent-Axia Euroflow Sdx150 Inline Centrifugal Fan - 150mm


Product Description

  • Summary:
    The SDX Euroflow in-line centrifugal duct fans are designed around an efficient backward curved centrifugal impeller and external rotor motor, to ensure a compact design, high performance and low sound levels
  • The range shall incorporate maintenance free external rotor motors, fitted with sealed for life ball bearings, ideally suited for speed control by electronic or voltage reduction

  • The SDX range is suitable for the extract of clean air only
  • HOT SPOT protection by means of a thermal contact switch incorporated within the windings shall be provided to prevent motor damage due to overloading/overheating
  • The motors shall be wound to suit a 230V/1PH/50Hz electrical supply, with all motors permanent capacitor type to optimise efficiency

  • The in-line fan shall be constructed from steel and incorporate an aerodynamically designed airflow guide vane, ensuring maximum performance from the unit

  • The SDX range is available in twelve models, sizes 100, 125, 150, 160, 200, 250 & 315mm diameter, with sizes 150 to 315 available as a standard or high performance in-line centrifugal duct fan

  • Quality Assurance
    Design and manufacture shall be in accordance with the standard for quality management systems BS EN ISO 9001:1994
  • It is not suitable for extracting or transporting grinding dust, soot, explosive or other aggressive gases etc
  • With motor insulation Class B, suitable for operating temperatures from -15°C to +40°C and atmospheres up to 95% RH
  • All models are to have 25 or 30mm inlet and discharge spigots, for ease of installation and shall come complete with mounting feet for horizontal or vertical mounting

  • Accessories
    A full range of accessories are available with the Euroflow in-line centrifugal duct fans such as:
    • Electronic Speed Controllers • Auto Transformer Speed Controllers • D.O.L

    Features & Benefits:

    Motor Insulation Class B, protected to IP44
    Operating Temperatures from -25°C up to +60°C
    All units suitable for speed control
    Quality Assurance to BS EN ISO 9001:1994
    Performance tested to BS848 Part 1 1980
    2 Year Warranty
    Latest model direct from manufacturer

  • Motors
    All sizes from 100 to 315 shall be protected to IP44 in accordance with BS EN 60529:1992
  • Starters • Pre & Secondary Filter Cassettes • Electric Heater Batteries • In-Line Attenuators • Backdraught Shutters • Fast Clamps • Flexible Ducting • Wall Terminals • Roof Terminals

  • Terminal Box
    An IP44 terminal box shall be supplied with all models with 20mm entry

  • Performance
    The fan performance shall be in accordance with tests to BS848 Part 1 1980, with the fan sound levels measured in a reverberant chamber in accordance with BS848 Part 2 1985

  • Impellers
    The impellers shall be aerodynamically designed centrifugal backward curved type, manufactured from steel or polyamide
  • The range shall provide a performance from 0.01³/s to 0.435m³/s with a maximum pressure development of up to 500 Pa
  • The motor and impeller shall be factory matched, statically and dynamically balanced in two planes to ISO 1940, Grade G 6.3

Manufactured by








Usually Despatches Within 2 Working Days
Add to Wishlist