View Large & Mouseover to Zoom
thmbnil
thmbnil
thmbnil
thmbnil
ISLS17265 Vent-Axia

Vent Axia Hrv - Integra Plus - 150mm Ducted Mvhr Unit

by Vent-Axia
£1,271.06£1,334.61
1,271.06
  • The Vent-Axia Integra Plus is designed for mounting in ceiling voids, lofts or above a suspended ceiling mounting.
  • Integra Plus Heat Recovery Unit
Quantity:
  • Usually Despatches Within 2 Working Days
Dispatched & sold by: i-sells
facebook

Description

Product Description

    • The unit comes complete with a 22mm condensate outlet
    • Four 150mm spigots are provided for simple connection to insulated flexible or rigid ventilation ducting
    • Balanced ventilation is achieved by using nominal 150mm ducting
    • Supplied complete with a transformer on a flying lead
    • The Integra Plus heat recovery unit has been specially designed to provide ventilation for flats or internal rooms in large residential, commercial, educational or leisure applications
    • The unit has a remote transformer and includes two integral centrifugal speed controllable fans plus a high efficiency polymeric heat exchanger.

Specifications


  • Using a high performance, polymeric heat exchange cube, together with two powerful fans, the Vent-Axia Integra Plus boasts a temperature efficiency of up to 70%. The compact cube interleaves outgoing moist air with incoming fresh air, allowing the heat from one to warm the other without the two air streams mixing. Energy is saved on room heating, with no power being used by the cube itself.
    Performance of Integra Plus: Up to 128 l/s FID. Ideal forinstallation in ceilings voids, cupboards or lofts.
    The MVHR unit has nine fan speed settings. The performance curve chart gives the ventilation rates at each fan speed setting compared to the pressure drop of the system
    The Integra Plus has three speed options: Normal, Boost and Purge.Performance:Maximum ventilation rate 460m3/hr, 128l/sN° speed settings: 9Efficiency: The unit should retain up to 70% of the temperature differential of out going air.
    Heat exchanger: should be of a multi plate cross-flow type constructed out of a polymeric material with ultra sonic welded joints.
    Motor: should be a 240V 50Hz A/C with sleeve bearings, greased for life. It shall operate up to an ambient temperature of 40°C and be fitted with a manual reset thermal overload protective device.
    Fan: The fan impeller should be of a forward curved centrifugal type, dynamically balanced.
    Controls: The unit should be powered via a remote multi-step transformer that provides a switch gate between a selected normal speed, boost and purge condition. The switch can be a manual or sensor type or a combination of both.
    Ducting spigots: The unit should have 4-N° 150mm Ø x 50mm spigots. (Can be converted to flat ducting).Filter: not fitted.
    Condensation: the outlet provided should be 22mm Ø located on the end, lid and base.
    Construction: the unit outer case should be a rigid black ABS moulding. The case should split along a horizontal joint to allow maintained access.
    Mains electrical supply: 230VAC 50Hz.
    Sound Levels: dB(A) @ 3mMaximum 38.0
    Complies with the CE directive
    Range Performance
    The MVHR unit has nine fan speed settings. The performance curve chart gives the ventilation rates at each fan speed setting compared to the pressure drop of the system
    The Integra Plus is supplied complete with a transformer on a flying lead.

    Range Dimensions
    Weight: 15.5Kg fan box, 5Kg controller



  • HCODE

    ISLS17265

  • MPN

    NA

  • CONDITION

    NEW

Dialog example

This is dummy copy. It is not meant to be read. It has been placed here solely to demonstrate the look and feel of finished, typeset text. Only for show. He who searches for meaning here will be sorely disappointed.

Dialog example

This is dummy copy. It is not meant to be read. It has been placed here solely to demonstrate the look and feel of finished, typeset text. Only for show. He who searches for meaning here will be sorely disappointed.