Sorry - this product is no longer available

This is no longer available although you may find similar or newer versions below:

Zinsser ALLCOAT® Exterior White Primer / Finish 2.5 Litre

Product Description

  • Designed for the long term decoration of timber, metal, masonry, plastic, concrete, cladding and more, it forms a vapourpermeable, low maintenance water-shedding coating, re-coatable in 1 hour.

    ALLCOAT® Exterior contains a biocide to protect the dried coating against fungaldegradation

  • After removing existing mould and mildew, two coats of ALLCOAT® Exterior will ensure that any exterior looks bright and beautiful for years.

    Zinsser ALLCOAT® Exterior gives excellent resistance against:

    Cracking, blistering and flaking.
    Rain and severe weather.

    Long lasting finish.
    Easy to apply.
    Excellent colour retention.
    Multi-surface application.

    Surfaces should be clean, dry, sound and free of any contamination that may interfere with adhesion

  • For most jobs, there is no need to purchase a separate primer
  • Sand edges of any remaining paint film until smooth
  • Remove all loose or peeling paint and chalky paint residue
  • Remove all existing mould and mildew before painting.

    Zinsser ALLCOAT® Exterior Primer

    Size: 2.5 Litre.
    Colour: White.


    Shake or stir well before using

  • Designed for all exterior surfaces, ALLCOAT® Exterior is ideal for new or previously painted wood, UPVC, galvanising, metals, cladding, weathered bitumen, stucco, brick, stone, cured concrete and more.

    ALLCOAT® Exterior is self-priming and will bond to existing glossy paints without sanding

  • Apply with synthetic bristle brush, roller or sprayer
  • Zinsser ALLCOAT® Exterior Primer is the best performance all surface paint

  • Special precautions should be taken during surface preparation of pre- 1960 paint surfaces as they may contain harmful lead.

    Avoid the inhalation of dust

  • Avoid painting in direct sunlight and maintain a wet edge to avoid lapping.

  • Wear a suitable face mask if dry sanding
  • New concrete, masonry and other related surfaces must be cured at least 30 days before priming
  • Apply when air and surface temperatures are between 10°-32°C and humidity is less than 85%
  • For airless spraying, use a .017in tip and high-medium (2000-2500 PSI) pressure

Manufactured by